SALab 6.0.68 SA2000 & SA3000 Stand alone >>>

News 2011:
- New improved 48 pin automotive connector
- More in/outputs than G3.
- Extra inverted 2-pole PWM-outputs
- Internal 4-bar MAP sensor
- Logging of rpm/tps/map changes per second.

Needs system with Dataset ID 210

Date: 2011-07-28

SALab 5.4.22 G3v3 Stand alone >>>
News 2010
- Anti lag system ALS, to keep boost at part load and when gearing
- Extra fuel and ignition maps
- Boost control with 2 independent load sensors

Needs system with Dataset ID 205

Date: 2010-08-06

SALab 5.3.33 G3v2 Stand alone >>>
News 2009
- Auto tune
- Auto setup guide for fast setup of base map
- Deceleration fuel, Extra idle air at start
- Open and compare log files

Needs system with Dataset ID 204
Date: 2010-06-04

SALab 5.2.58 G3 Stand alone >>>
Needs system with Dataset ID 203
Date: 2008-09-22

SALab 5.0.46 G2 Stand alone >>>
Needs system with Dataset ID 201
Date: 2007-01-15

SALab 4.0 G1 Stand alone >>>
Date: 2005-07-01

Civinco system loader 1.0.15 >>>
Program for upload of new firmware in the SA systems. Tex upgrade from ID 204 to ID 205.
All firmware is coded for each unique box serial number, so contact Civinco to get your upgrade.

Civinco system loader manual >>>

Date: 2011-07-07

Manuals

Manuals Stand Alone
SA2000/3000 ID210, SALab Stand alone manual SWE >>>
SA500/SA1000 G3v3 SALab Stand alone ENG >>>
SA500/SA1000 G3v2 SALab Stand alone ENG >>>
SA500/SA1000 G3 SALab Stand alone ENG >>>
SA500S/SA1000 G2 & SALab G2 Stand alone ENG >>>

Manual online:
Manual G3 Stand alone ENG >>>

Data sheet Stand Alone
Specification of SA500 G2 connector ENG >>>
Specification of SA1000 G2 connector ENG >>>

Installation guides Stand Alone
Installation guide Porsche 944 NA -83 ENG >>>
Installation guide Porsche 944 NA 85B-87 ENG >>>

Drivers

TodosII_driver 1.0 >>> Driver for TodosII Tune Card reader
Installation manual for Todos (in Swedish) >>>
Date: 2009-07-20

USB_driver 2.08.14 >>>
Drivrutin för USB-kommunikation med BC500, BC1000, SA500, SA1000, SA2000 & SA3000
Manual for how to change COM-port >>>
Date: 2011-07-07